mini UHF PR9200 module

Introduction

TS-310M is a high performance based on PHY Chips PR9200

*PHY Chips PR9200 inside with outstanding performance and cost-effective.

*2Read distance with 3m above. (Tested with Impinj E41b inlay and 2dbi Antenna)

*Stable performance with less affected by rising temperature.

*Super low power consumption; no additional cooling devices required.

*Good consistency in terms of RF parameters.

*Simple peripheral circuit design(refer to 4-1: circuit design reference)

*Full compatible with different communication interfaces of INDY R2000 series products.

Key Features:

Phychip PR9200 Inside	Excellent Consistency
PR9200 has an outstanding performance with a low cost.	A model of design consistency. Every indicators are calibrated rigorously, ensure consistency.
Excellent Performance of Reading Tags	Completely Solve the Problem of Heat
◆Identifying Tags sensitively and stably. ◆Stable read distance is 2-3m with Microstrip ceramics antenna. ◆8dBi Circular Polarization Planar Antenna: >10m. ◆12dBi Linear polarization antenna: >15m. ◆Performance of multi-tags identification: >50pcs. ◆Read rate: >50pcs/s.	◆Don’t need any cooling devices. ◆No heat during long-term continuous full load working at room temperature. ◆Continuous Current <200mA @26 dBm Output (3.5V Power Supply). ◆Peak pulse current <260mA @26 dBm Output (3.5V Power Supply).
Excellent Stability	Simple and Efficient Interface
◆24 hours X 365 days continuous working without Crash. ◆Less influence by shell, electromagnetic environment, etc. ◆Wide temperature design. Temperature Coefficient is very low.	◆Communication interface is compatible with our INDY R2000 series. ◆Peripheral circuits are very simple, single power, don’t need to connect Ta capacitor externally (See figure 1: Circuit Design Reference).
Supports Two Installation Methods
◆Supports RF connector + FPC connector installation method. Supports Surface Mount Solder.

Specifications

Electrical Characteristics
Operating Temp	-20°C to 70°C
Storage Temp	-20°C to 85°C
Humidity	95%(+25°C)
Parameter
Protocol	ISO 18000-6C(EPC gen2) ISO 18000-6B
Frequency Range	902MHz~928MHz or 865MHz~868MHz or customize others frequency according to your needs
Working Voltage	DC 3.5V – 5 V
Standby current	<80mA (EN high level)
Sleep Current	<100uA (EN low level)
Operating Current	180mA @ 3.5V (26 dBm Output，25°C )。 110mA @ 3.5V (18 dBm Output，25°C )。
Starting Time	<80mS
Output Power	0-26dbm
Output Power Precision	+/- 1dB
Output Power Flatness	+/- 0.2dB
RF connector	I-PEX
Receive Sensitivity	< -70dBm
Peak Inventory Speed	>50 tags/sec
Tag Buffer Capacity	200 tags @ 96 bit EPC
Tag RSSI	Supported
Host Communication	TTL Uart port Wiegand 26 Wiegand 34
GPIO	2 input 2 output (3.3V TTL Level)
Max Baud Rate	115200 bps (Default and Recommended) 38400bps
Heat Dissipation	Air cooling (Don’t need external Heatsink).
Working Regions	US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China Japan Korea Malaysia Taiwan

PIN Assignment of connector(Connector Mode)

PIN	Interface	Description
1	VCC	Power Supply DC 3.5V-5V
2	VCC	Power Supply DC 3.5V-5V
3	GND	Grounding
4	GND	Grounding
5	EN	High level enable
6	Reserved	Reserved
7	Reserved	Reserved
8	GND	Grounding
9	GND	Grounding
10	GPIO1	Input IO1
11	GPIO2	Input IO2
12	GND	Grounding
13	GND	Grounding
14	485 Direction	485 Data direction control
15	Reserved	Reserved
16	RXD	UART RXD
17	TXD	UART TXD
18	Beeper	Buzzer control, need external buffer
19	GPIO3	Output IO3
20	GPIO4	Output IO4

PREVIOUS：rfid ABS UHF anti metal tag(TS-A12522) NEXT：rfid textile laundry tag

RELATED PRODUCTS

Contact: Linda Chen

Phone: 18688748819

Tel: 0755-27575241

Email: sales@taseirfid.com

Add: C303,HuaChuangDa Cultural&Science Industry Park,HaiHui Road,Bao'An District 49,ShenZhen,China