RFID UHF R2000 8 antena reader

Based on Indy R2000 chip:

High performance anti-collision

algorithm

RF transceiver is Impinj Indy R2000

Unique multi tags identification algorithm.

Provides the highest efficiency.

Optimized algorithm for little tags

Dual CPU architecture

Better tag response time.

Optimized for little tag quantity applications.

◆The main CPU is responsible for the polling tag, and the sub CPU is responsible for data management.

◆Polling tags and sending data in parallel do not occupy each other's time, greatly improving overall performance.

◆The sub CPU is responsible for generating real random numbers.

◆The sub CPU is responsible for monitoring the operating status of the system.

Fast 4 antenna polling inventory

Two tag inventory modes

◆High-speed polling of 4 antennas, the shortest polling time per antenna is 25ms.

◆The polling time of each antenna can be configured separately.

◆ Cache mode and real-time mode.

◆ Cache mode reads the tag and puts it into the cache and filters the duplicate data. The data is not redundant.this mode improve the efficiency of multi tag inventory

◆ Real-time mode uploads immediately after reading the tag, and the user can get the tag data in the first time.

Hardware crash monitoring

Wide input low voltage design

◆The hardware monitors the CPU operating status.

◆24 hours X360 days  operation does not crash.

Only need DC 12-18v input voltage

Low power design

RF amplifier status monitoring

◆Maximum out power only needs 600mA +/-10% (12V DC Input).

◆Low-power Mode, single tag only 300mA +/-10% (12V DC Input)

◆Monitor the operating status of the RF power amplifier.

◆Ensure that the amplifier does not saturate and ensure that the amplifier will work stably for a long time.

Realize all 18000-6B/C protocol functions

18000-6B large data read/write

◆100% 18000-6B compatible.

◆Can be switched rapidly between  two protocols.

◆Read 216 bytes in one time takes less than 500mS.

◆Write 216 bytes in one time takes less than 3.5 seconds.

◆Can also read/write data with various lengths.

◆Extremely stable (approximate 100% success rate).

Antenna connection status monitoring

Dual backup output power correction

◆judge the antenna connection status.

◆protect receiver

◆can be closed by command.

◆Ensure that the RF output power is accurately and controllable.

◆Two mutually-matched power check modules, the system can operate normally unless it is damaged at the same time

Excellent onboard power system

Dual backup output power correction

◆There are 8 independent power supplies onboard, and each component is powered by an independent power supply.

◆All power supplies have a soft-start function to ensure voltage stability at all times

◆Ensure that the RF output power is accurately and controllable.

◆Two mutually-matched power check modules, the system can operate normally unless it is damaged at the same time

Simple and efficient command system

Outstanding thermal design

◆Serial-based command system.

◆Simple, efficient, convenient, and fast integration

◆The heat generating devices all have a heat conducting structure.

◆Large area of heat sink contact surface.

◆The thermally coupled interface uses a solid material with high thermal conductivity and does not volatilize at high temperatures.

◆Disposable cast aluminum body heat dissipation, long-term continuous work does not heat